FIRST INSTALLATION

The following display appears:

Use the  buttons here to select the settings for your TV set.

When doing this, refer to the operating instructions for your TV set!

Video Output via

Select here the connection on the receiver to which you have connected your television. Either

SCARTor

TV aspect ratio

Here you select the TV's picture format. Either

-4:3 or

-16:9

Picture format

Select here the type of screen display, depending on the setting of your TV format:

-TV format “4:3”: Pan & Scan or Letterbox

-TV format “16:9”: Always 16:9 or Automatically

TV-Scart-Output

Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.

-FBAS – Color Video Baseband Signal

-RGB – Red/Green/Blue signal (not currently available) or

-Y/C – S-Video signal (luminance/chrominance)

HDMI/YUV

HDMI/YUV Format

Select here the video resolution that is to be used on your TV. Either

-1080i (resolution 1920 x 1080, half-screen images)

-576p (resolution 720 x 576, full-screen images) or

-720p (resolution 1280 x 720, full-screen images)

Show 4:3 event

Select here the type of screen display for 4:3 programmes on a 16:9 TV:

-normal (Pillarbox)

-stretched (Fullscreen)

-zoom in (Pan & Scan)

Audio format via HDMI

Select here the type of audio signal that is to be output over the HDMI interface. Select the signal that your TV set can process.

-Decoded PCM

-S/PDIF format

Press the ! (green) button to move to the next menu.

13

Page 13
Image 13
Kathrein UFS 902 manual SCARTor TV aspect ratio, Picture format, TV-Scart-Output, HDMI/YUV Format, Show 43 event