FIRST INSTALLATION: DiSEqC™1.0
LNB Type
Here use the buttons to select the LNB type used in your system. The choice is between “Universal” and
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was configured.
Use the buttons to select the frequency range to be changed (low, high or limit frequency).
Use the buttons or the number buttons to set the exact frequency for which your LNB was configured.
Test transponder
To check whether the settings that you have made are correct, use the buttons to move to the
“Test transponder” field. Use the buttons to select the various transponders. If your settings are correct, you will see at the top right of the screen the live signal of a channel for the currently selected transponder.
If you are not receiving a signal, check your settings again and if necessary call for expert help.
You have now completed all settings for the first satellite. Press the button to return to the “Antenna Configuration Menu” and perform the settings in the same way for the remaining satellites.
When you have finished configuring the satellite press ! (green). The receiver then automatically opens the menu for the channel search. Continue with the section (Execute channel search).
16
