Kathrein UFS 902 manual CONTROLS, Displays and Connections, View of Front Panel Flap Folded Down

CONTROLS, DISPLAYS AND CONNECTIONS

This section provides a brief description of all the controls, displays and connections. The button symbols presented here can also be found in the description of the operating steps.

VIEW OF FRONT PANEL (FLAP FOLDED DOWN)

  

VIEW OF REAR PANEL

  

Front panel controls and displays

1.Common Interface for one CA module for pay TV cards *) (behind the flap)

2.Stand-by button

3.TV/R button

4.Display

5/6. Arrow buttons for changing channel

*) The CA module and pay TV cards are not included

USB 2.0
5V... 500 mA max
			

Rear panel controls and displays

1.On/Off switch (with mains disconnect)

2.Mains power cable

3.RS 232 port (for Service only)

4.Optical data stream output (SPDIF/ Sony Philips Digital Interface Format) for Dolby Digital AC 3 audio

5.USB 2.0 port (USB-A connector)

6.HDMI socket for connection to a TV set

7.2 x Cinch plug audio outputs (L/R)

8.Cinch plug video output (composite colour)

9.3 x Cinch connections for component outputs YUV labelled = Y/Pb/Pr

10.Scart socket for TV connection

11.2 x SAT-IF connections (input above/ loop-through output below)

7