EPG - ELECTRONIC PROGRAMME GUIDE
ADDITIONAL INFORMATION (i BUTTON)
The additional information can always be opened by pressing
the button whenever the “i symbol” appears in front of the programme name (see screenshot on the right). First however the channel must be selected. The following display appears (example):
The additional information available for a programme is displayed in its own window. By pressing the button, if available, you can open further additional information on the selected programme.
The buttons enable you to display the additional information for the preceding or following programmes in the order of the previously selected list (see header). This feature always assumes that the data has been supplied by the channel provider.
Using the (red dot) button you can copy the selected programme to the recording settings (see “Recording” section).
Press the or the button to exit the additional information.
REMINDER FUNCTION (CHANGE OVER TO PROGRAMME)
If you wish to be reminded at the start of a programme, you can activate the reminder function for the desired programme. The reminder function is set up in exactly the same way as programming a recording. The only difference is that in the “Target” line the entry must be “Reminder”. Select the desired settings for your reminder (see “Recording (timer)” for the setting options) and then confirm the setting of the
reminder function by pressing the button. The programme is marked in the Programme Guide with a green dot and the receiver will automatically switch over to the
41
