| Assembly |
|
37 | 39 |
|
| .437 Cap Nut |
|
Right Shock |
|
|
| .437 Cap Nut | Front/Rear Axle |
|
| |
| .437" |
|
• Insert a #8 x 3/4" screw through the right shock to secure |
| |
it to the right fork. |
|
|
• Tighten the screw with a Phillips screwdriver. | • Slide the remaining front/rear axle through the left shock, | |
the large wheel and out through the right shock. | ||
Do not | ||
• Fit a .437 cap nut onto the end of the front/rear axle. | ||
|
38 |
Right Shock |
Left Shock |
Large Wheel |
(with Hex Bushings) |
•Fit the other large wheel (with hex bushings) between the shocks.
•Tap the cap nut with a hammer to secure the cap nut on the front/rear axle. Pull on the cap nut to be sure it is secure.
Hint: You may need the help of another adult to support the other end of the front/rear axle while you tap the cap nut.
40 | Small |
Hole | |
| Left Handlebar |
| Left Grip |
Note: The left and right grips are not interchangeable! The hole in the left grip is smaller than the hole in the right grip.
• Fit the left grip on the end of the left handlebar.
Hint: If it is difficult to slide the grip onto the handlebar,
20 moisten the inside of the grip with water.
