Step
Event 11—Enter the Maintenance State
As soon as the Cisco uBR924 has successfully completed the above events, it enters the operational maintenance state and is authorized to forward traffic into the cable network.
508178.322 CMAC_LOG_STATE_CHANGE | maintenance_state |
Step 5—Use Additional Troubleshooting Commands
You can use other show controllers and debug cable modem commands to troubleshoot different aspects of a Cisco uBR924 cable access router. However, the most useful command is the show controllers
To display additional controller information inside a Cisco uBR924, enter one or more of the following commands in privileged EXEC mode:
Command | Purpose |
show controllers | Displays |
|
|
show controllers | Displays privacy state information. |
|
|
show controllers | Displays information about the Data Encryption |
| Standard (DES) engine registers. |
|
|
show controllers | Displays information about the MAC and SID filters. |
|
|
show controllers | Displays the Cisco uBR924’s internal |
| table. |
|
|
show controllers | Displays detailed |
log resets state] |
|
|
|
show controllers | Displays |
| transmit physical registers. |
|
|
show controllers | Displays tuning information. |
|
|
show interface | Displays information about the Cisco uBR924 |
| interface. |
| |
To debug different components of a Cisco uBR924, enter one or more of the following commands | |
in privileged EXEC mode: |
|
|
|
Command | Purpose |
|
|
debug | Debugs baseline privacy information. |
|
|
debug | Debugs the bridge filter. |
|
|
debug | Debugs cable interface errors. |
|
|
debug | Debugs Cisco uBR924 interface interrupts. |
|
|
debug | Displays and debugs the |
| real time. |
|
|
debug | Debugs map message processing information. |
|
|
18Cisco IOS Release 12.0(5)T