Cisco Systems UBR924 manual Show controllers cable-modem filters, Syntax Description

show controllers cable-modem filters

show controllers cable-modem filters

To display the registers in the MAC hardware that are used for filtering received frames, use the show controllers cable-modem filters command in privileged EXEC mode.

show controllers cable-modem number filters

Syntax Description

number Controller number inside the Cisco uBR924.

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

ReleaseModification

11.3 NA This command was first introduced.

Usage Guidelines

Some of the filtering parameters are MAC hardware addresses, Service IDs (SIDs), and upstream channel IDs.

Troubleshooting Tips for the Cisco uBR924 Cable Access Router 31