show controllers cable-modem bpkm
26 Cisco IOS Release 12.0(5)T
show controllers cable-modem bpkm
To display information about the baseline privacy key management exchange between the
Cisco uBR924 cable access router and the headend CMTS, use the show controllers cable-modem
bpkm command in privileged EXEC mode.
show controllers cable-modem number bpkm
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Baseline privacy key management exchanges take place only when both the Cisco uBR924 and the
CMTS are running code images that support baseline privacy, and the privacy class of service is
enabled via the configuration file that is downloaded to the cable access router. Baseline privacy code
images for the Cisco uBR924 contain k1 in the code image name.
Examples
The following output is displayed when the headend CMTS does not have baseline privacy enabled:
uBR924# show controllers cable-modem 0 bpkm
CM Baseline Privacy Key Management
configuration (in seconds):
authorization wait time: 10
reauthorization wait time: 10
authorization grace time: 600
operational wait time: 1
rekey wait time: 1
tek grace time: 600
authorization rej wait time: 60
kek state: STATE_B_AUTH_WAIT
sid 4:
tek state: No resources assigned
number Controller number inside the Cisco uBR924 cable access router.
Release Modification
11.3 NA This command was first introduced.