WARNING
_i=, ,i , unllu
Fire andtor Electrical Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter or exhaust filter cover installed.
i
EXHAUST FILTER
HEPA
The exhaust fitter cartridge must be
replaced when dirty, Replace the filter when the entire surface area is covered evenly° The filter CANNOT be washed as it will lose its dust trapping ability,
NOTE: See PARTS AND FEATURES for Exhaust Filter Number
1. Pull up on | Exhaust | _ | t | ||
the exhaust ill- | Filter | AM/.* | I | ||
ter | cover | tO | Cover_....._..._._;_/,./._ | ||
the | motor cover |
|
|
| |
remove | from | _ |
|
| |
and | lay | aside° |
|
|
|
Always follow all safety precautions when cleaning and servicing the
2. Slightly push the exhaust filter
cartridge to the side, as shown in the illustration, and pull up to remove.
3.Replace the
exhaust filter car-
tridge, | carefully | Exhaust | ||
positioning | it so |
| ||
that the | side |
| ||
shown | in the |
| ||
illustration | goes |
| ||
down | under the |
| ||
ribs. | Then | push |
| |
the other | side |
| ||
down until it snaps into place° Place the new filter into the motor cover with the grey edge down.
4. Replace the exhaust filter
Exhaustcover by engag- ing the two tabs on the rear and
pushing down in front until it
snaps closed.
. WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit.
Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting°
16
