Kenmore 116.22812, 116.22813 owner manual To Check Agitator Assembly, To Replace Agitator Assembly

!._ WARNING

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.

!1 ii1'!11111i'"

TO CHECK AGITATOR

ASSEMBLY

-_=:_-----___	When brushes
_)}_	__._ are worn	to the
	level of the base
	support	bars,
	replace	the
	agitator
	assembly_
Base Support	Bars

TO REPLACE AGITATOR

ASSEMBLY

1.Remove Power-Mate ® cover, agitator

cover, belt and agitator assembly. See "To Remove Belt" in BELT CHANGING AND AGITATOR CLEANING°

2, Remove end caps, washers, screws, end brush, and brush sprocket pieces from ends of old agitator assembty

3.Reassemble agitator assembly. To Iine ...........

up screw holes in dowel, sprocket and			,_._._._;_-_
end brush, be sure all of the brush			_{_:;;
sprocket pieces align properly,		See	::_:;_t,_:
AGITATOR	ASSEMBLY.		.............
4. Reinstall belt, agitator assembly,
agitator cover and Power-Mate e cover°
See "To Replace Beft" in BELT
CHANGING	AND AGITATOR	CLEANING.

End

BrushEnd

Screw Cap

Washer

End	Agitator Unit
Cap		Washer
	Brush	Sprocket

19