HOW TO START
WARNING
Personal Injury and Product Damage
Hazard
•DO NOT plug in if switch is in ON position. Personal injury or damage could result.
,The cord moves rapidly when rewinding. Keep children away and provide a clear path when rewinding the cord to prevent personal injury°
,DO NOT use outlets above counters. Damage from cord to items in surrounding area coulldoccur.
Cord |
|
|
|
Rewind | 1. Pull cord out of | ||
| |||
| canister | to desired | |
| length, | The cord | |
| will | not | rewind until |
| the | cord rewind | |
| bar | is pushed. |
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way, If the plug does not fit fully in the outlet, reverse the plug_ If it still does not fit, con- tact a qualified electrician to install the prop- er outlet, Do not change the plug in any way.
2.Plug the polarized power cord into a 120 Volt outlet located
near the floor
To rewind: Unplug the cleaner. Hold
the plug while rewinding to pre- vent damage or injury from the moving cord, Push cord rewind bar.
Pile Height
Indicator
Handle
Pile Height Pedal
(some Models)
3.Lower wand from upright position by pressing on the handle release pedal
cAuTioN
DO NOT leave the
.... ul,
4.Select a pile height setting by pressing the small pedal on the rear of the Power-
Matee.The pile height setting shows on the indicator_ See SUGGESTED PILE HEIGHT
SETTINGS,,
Attention: Refer to your carpet manufac- turers cleaning recommendations° Some more delicate carpets may require that they be vacuumed with the
_OFF
%. FLOOR 5oSelect a switch
_PET
position on the handle.
OFF
FLOOR - turns on the canister motor only.
CARPET - turns on both the canister and the
NOTE - When this switch is in the FLOOR position, the headlight and dirt sensor (some models) DO NOT function since no electricity flows to the