TO STORE A'I-I'ACHMENTS
Remove dusting brush or combination
brush. Snap into appropriate storage location.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the extension wand from the hose, Twist the wand to the left and pull from the hose end.
EXTENSION HOSE
SOME MODELSSome models include an extra hose which connects to the stretch hose on the vacuum for a longer cleaning reach.
Unit Hose | _ | Extension Hose |
ower Wand
Unlock
\
Locking
Ring
Upper
Wand
Unlock the wand by turning the wand lock- ing ring to the UNLOCK position.
Slide the lower wand into the upper wand. Turn the wand locking ring to the LOCK position.
Place the crevice tool down into the com- pressed wand. Snap into the appropriate storage location.
Reinsert the hose fully into the opening on the lower body from _hich it was removed. Press firmly to assure connection
DO NOT pull the vacuum cleaner around the room by the hose. Property damage could result.
| Furniture* |
| |
DUSTING BRUSH <_ | X |
CREVICE TOOL | X |
| |
COMBINATION BRUSH | X |
| X |
|
"Always clean attachments before using on fabrics.
Insert the two tabs on the end of the
extension hose into the two "J" shaped slots on the unit hose and twist to connect.
All attachments and the telescoping wand can be attached to the open end of the hose.
FLOOR BRUSH AND WAND
SOME MODELS
Some models have an extra brush and wand for cleaning bare floors. Twist one end of the adaptor into the floor brush and the other end into the straight wand. Connect the straight wand to the telescopic wand and then to the vacuum hose or extension hose.
Floor Brush
wandJ
When using the regular hose or with the extension hose attached, the cleaner should be on a solid surface on the same level or below the level of
the user'sfeet. DO NOT usa the hoses when the cleaner is above the level of the user'sfeet.
CLEANING AREA
BetweenCushions* Drapes* Stairs Walls
XX
XX
XX
X
10
