Kenmore 116.33612 Suction Control Slide, Telescoping Wand With, To Operate Suction, items, twist

The attached hose swivels to

make cleaning easier in every direction.

Remove the hose from the

hose clip by pulling straight out.

TELESCOPING WAND WITH

SUCTION CONTROL SLIDE

SOME MODELS

CreviceRemove the

Toottelescoping wand from

,Telescoping its storage

Wandposition.

To achieve maximum reach with the attachments, add the crevice

tool to the end of

the wand by Suction

inserting and Control

Slide--_

twisting slightly.

Wand

Crevice

Tool

When using the

dusting brush or the combina-

tion brush, they may be attached direct-

ly to the wand or placed on the end of the crevice tool.

Remove the crevice tool from its storage position in the wand. Turn the locking ring to the UNLOCK position.

Extend the wand to its full length. Turn the locking ring to the LOCK position. Attach the extension wand onto the open end of the hose.

		Suction
Wand _	_.	Control	Slide

Upper

Wand

Align the tabs on the extension wand with the "J" slots in the hose. Push the wand into

the hose and twist to the right to lock.

TO OPERATE SUCTION

CONTROL SLIDE

Telescoping		Wand
When using
attachments		Suction
for cleaning		Control
draperies,		Slide
small	rugs
with	low pile
and	other

delicate

items, twist

the suction control slide to the open position. This lever is located on the telescoping wand, close to the hose.

This will reduce suction for ease of cleaning.

NOTE: Return suction control slide to the closed position for normal cleaning.

CAUTION

When usingattachments,be carefulnot_o overextendbhes_ch hosewhenreaching.

T_ng to reach _ the hose stretch

capabililycouldcauselhe clearerto _p ova-. Make surethe ca,'l:mM:mfloorselectoris in

the bare floorposition.Damageto lhe floor

surfacemayoccurif thecaipet_ is used.