Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand.
HANDLE MOUNTED
SOME MODELS
To start the vacuum cleaner, slide the On/Off switch from the OFF position to the ON position. To stop the vacuum cleaner, slide the On/Off switch to the OFF position.
Crevice
Tool
Telescoping
Wanq
Dusting
- Stretch
Hose
Combination
Collar
Identify each of the attachments shown above.
TO USE ATTACHMENTS
Place the carpet/bare floor selector in the bare floor setting by rotating the selector back and down to the bare floor setting.
See CARPET/BARE FLOOR SELECTOR section.
When returning the bare floor selector to the carpet setting, use caution as the selector can move quickly to that setting due to tension created by the belt.
iL,
Remove the lower end of the stretch hose from the cleaner by grasping the hose collar, twisting and pulling straight out. The attachments can now be added to the hose.
NOTE: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow by the attachments themselves or by new carpet fuzz filling the bag quickly. See the
TROUBLESHOOTING section.
WARNING
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure to do so could result in eloctrical
shock or personal injuryfrom cleaner suddenly starting.
8
