Kenmore 116.31722 To Store Attachments, Extension Hose, Floor Brush and Wand Some Models

TO STORE ATTACHMENTS:

Remove dusting brush or combination brush. Snap into appropriate storage roca- tion.

Remove crevice tool from the wand by twist- ing. Lay aside.

Remove the extension wand from the hose.

Twist the wand to the left and pull from the hose end.

Lower

Lock

Locking

Ring

Upper

Wand

[tl_l_:k tho wand by Itlrrling tho wzmd lock

=ng ring to the UNLOCK position.

Slide the lower wand into tbe upper wand. Turn the wand locking ring to the LOCK position.

Place 111ocrevice tool down into Ihe com- pressed wand. Snap into the appropriate storage location.

Reinsert the hose fully into the opening on the lower body from which it was removed. Press firmly to assure connection

CAUTION

NOT pull the vacuum cleaner nd the room by the hose.

perry damage could result.

EXTENSION HOSE:

SOME MODELS

Some rnoders include an extra hose which connects to the stretch hose on the vacuum for a longer cleaning reach,

Unit Hose _ Extension Hose

Insert the two tabs on the end of the

extension hose into the two "J" shaped slots on the unit hose and twist to connect.

All attachments and the telescopingwand can be attached to the open end of the hose.

FLOOR BRUSH AND WAND: SOME MODELS

Some models have an extra brush and wand

for cleaning bare floors. Twist one end of the aduplor Inlo tho Iloor brush and Iho olhor end ialo the straight wand. Connect Ihe straight wand to the telescopic wand and then to the vacuum hose or extension bose.

Adaptor J _

I CAUTION

When using the regular hose or with the extension hose attached, the cleaner should be on a solid surface on the same level or below the level of the user'sfeet, DO NOT use the hoses when the cleaner is above the level of the user'sfeet.

		CLEANING	AREA
ATTACHMENT	Furniture*	Drapes*	Stairs	Walls
DUS_NG BRUSH _"_	X	X		x
CREVICETOOL	X	x	X
COMBINATION BRUSH	X	X	X

"Alwaysdeana_achmentsbeforeuslngonfabrics.

10