EXHAUST | FILTER | SECONDARY | FILTER | ||
HEn |
| FOAM |
|
| |
The exhaust filter cartridge must be | Check secondary filter frequently and | ||||
replaced when dirty. It should be replaced | |||||
change | when dirty. |
| |||
regularly depending on use conditions. The |
| ||||
!• |
|
| |||
filter CANNOT be washed as it will lose |
|
| |||
its dust trapping ability. | WARNING | ||||
|
| ||||
wARNING | Electrical Shock Hazard | ||||
Do not operate the cleaner without | |||||
|
| ||||
not operate without exhaust | the motor safety filter. Be sure the | ||||
|
| filter is dry and properly installed to | |||
r. |
| I prevent motor failure and/or electri- | |||
|
| cal shock. |
| ||
NOTE: See PARTS AND FEATURES for the |
|
| |||
exhaust tilter | #. |
|
|
| |
| Press | Remove the dust bin as outlined in the | |||
Press inward | DUST BIN CLEANING section. | ||||
on each side | Inward |
|
|
| |
of exhaust til- | Exhaust <=.('[_ |
|
|
|
p_JII out Io
remove f_onl
vacuum | cleafl- | Filter Cover._=__ |
ter cover | and |
er.
t_xhaust
Remove the exhaust filter car-
tridge.
Replace the exhaust filter cartridge, careful- ly positioning it so that it tits into the motor
cover. The grey edge of the filter should
be facing away from
the operator.
Push only on filter car-
tridge frame, not on filter itself.
Replace the exhaust filler cover by placing tabs in slots and pushing in until cover snaps into place.
Remove secondary filter from vacuum cleaner.
Wash the secondary filter in warm soapy water, rinse and dry thoroughly by squeez- ing the filter in your hand and letting it air dry.
DO NOT wash in the dishwasher,
DO NOT install damp.
Replace dry secondary filter. Ensure filter is properly installed over filter opening.
Replace the dust bin as outined in the DUST BIN CLEANING section.
16