The attached hose swivels to
make cleaning
easier in every swivel- direction.
Remove the hose from Ihe
hose clip by pulling straight out.
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
-Crevice Tool
Remove the
telescoping
Telescoping wand from
Wand
its storage position.
R_nove the crevice tool from its storage position in the wand. Turn the locking ring to the UNLOCK position.
Extend the wand to its full length. Turn the locking ring to the LOCK position. Attach the extension wand onto the open end of the bose.
Lower_"_ _Suction
Wand ___Control | Slide |
\_\Locki.gRt.g I _
Upper
Wand
When using the dusting brush or the combi- nation brush, they may be attached directly
to the wand or placed on the end of the crevice tool.
Align the tabs on the extension wand with the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach with the attach- ments, add the crevice tool to tile end of
Ihe wand by | Hose |
inserting |
|
and twist- | Suction |
ing slightly. | Control |
Slide |
Wand,
Tool
TO OPERATE SUCTION
CONTROL SLIDE
Telescoping Wand
When using attachments for cleaning draperies, small rugs with low pile and other delicate items, twistthe suction control slkJe to the open position. This lever is located on the telescoping wand, close to the hose.
This will | Suction |
Control | |
reduce | Slide |
suction | for |
ease of |
|
cleaning.
NOTE: Return suction control slide to the closed position for normal cleaning.
!CAUTION
When using attachments, be careful not to overextend the stretch hose
when reaching.Trying to reach beyond the hose stretch capability could cause the cleaner to tip over. Make sure the carpet/bare floor selector is in the bare floor position. Damage to the floor surface may occur if the carpet setting is used.
