![TO CLEAN AGITATOR:](/images/new-backgrounds/53325/5332535x1.webp)
TO CLEAN AGITATOR:
NOTE: in order to keep cleaning efficiency high and to prevent damage to your vacu- um, the aoitator must be cleaned every time the belt is changed.
The agitator must also be cleaned every 7 to 10 uses.
Remove any dirt or debris in the belt path area or in the agitator area.
TO REPLACE BELT:
Make sure that the carpet/bare floor selec-
tor is in the carpet position.
Loop the new belt on the motor shaft.
Motor
Shaft
Exploded View - Agitator
Assembly
Bearing
Cover
Ag or,,,,,, I t
BOI( EtPd
Pulley Cap
Carefully remove
any string or debris located on
the agitator, end caps, or agitator shaft.
End Cap
Replace the end caps. See the exploded view for correct assembly.
Carpet/Bare Floor
BeltSelector Shaft
PulleyBelt
BELT ROUTING
Correct Routitlg of Belt
(Selector hi CalpotPo_ltloz_)
Agl/Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
Carpet/Bare
Floor Pedal
Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector In Bare Floor Position)
/ _ ,_ Carpet/Bare
I" ,\ Floor Pedal
AgitatorBeltCarpet/Bare Floor
Selector Shaft
18