Extend the wand to its full length. Turn the locking ring to the LOOK position. Attach the extension wand onto the open end of the hose.
_l°lock "_ | Upl_r |
| Wand |
Align the tabs on the extension wand with the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach with the attach-
ments, add the crevice tool to the end of the
wand by inserting and twisting slightly.
Hose
",2
Attach combination brush directly to the wand.
Combination [f_, • II. •
See ATTACHMENT USE TABLE for combi-
nation brush usage.
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning draperies, small rugs with low pile and other delicate items, twist the suction control slide to the open position. This slide is located on the telescopic wand, close to the hose.
This will reduce suction for ease of cleaning.
su_ Note: Return con/n_/
Ude suction control slide to the closed
position for normal cleaning.
CAUTION
When using attachments, be careful not to overextend the stretch hose when
reaching.Trying to reach beyond the
hose stret""'capabilitycouldhcause the
vacuum cleaner to tip over.
TO STORE ATTACHMENTS
Remove the combination brush. Snap into appropriate storage location.
Remove crevice tool from the wand by twist- ing. Lay aside.
Remove the telescopic wand from the hose.
Twist the wand to the left and pull from the hose end.
Unlock the wand by turning the wand locking ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK posi- tion.
Place the crevice tool down into the com-
pressed wand. Place the telescopic wand in the wand holder
!CAUTION
DO NOT pull the vacuum cleaner around the room by the hose. Property damage or personal injury could result.
10
