Review this table to find
_:.:..._.- | . | _ | .7:. _. _._.: |
Vacuum cleaner won'ttun.
1. Unplugged at wall outlet.
2, Tripped circuit breaker/blown fuse at householdservice panel.
3.Thermal protectortripped.
4.Defective wall outlet.
1.Plug in firmly,select the desired set- ting on the touch control,
2.Reset dmuit breaker or replace fuse.
3.Allowvacuum cleaner to cool, then reset thermal protector.
4.Check w_tha good appliance/lamp, have properly s_rviced.
Pc_rjobofdirt pick*up.
Vacuum Cleaner picksup moveab_ rugsor pushes too hard,
I, | Fullor cloggeddust bin. | 1. | Empty dust bin. |
2. | Wrong pile height setting. | 2. | Adjustsetting. |
3. | Worn agitator. | 3. | Take to yournearest Sears |
|
|
| Service Center. |
4. | Clogged nozzle. | 4. | Check CLOG REMOVAL. |
5, | Clogged hose. | 5. | Check for clogs. |
6, | Hole in hose. | 6, | Take to yournearest Sears |
|
|
| Service Center. |
7. | Hose not inserted fully. | 7. | Insert hose fully. |
8. | Motor protectionsystem activated. | & | Check for clogs. |
| (change of sound) |
|
|
g. | Dirty filters, | g. Change filters. | |
1. | Wrong pile height setting. | 1. | Adjust setting. |
Lightwon'twork. | 1. | Burned out lightbulb. | 1. | Change light bulb. |
Agltafordoes notturn. | 1. | Handle in full upright position. | 1. | Move handle from upright position. |
| 2. | AgitatorOverload tripped. | 2. | Reset Agitator Overload. |
| 3. | Thermal protector tripped. | 3. | Allow vacuum to cool, then reset |
|
|
|
| thermal protector. |
Ainlow restricted | 1. | Attachment use restrictsair flow. | 1. | Check ATTACHMENTS for fuzz, lint. |
with attachmentuse. |
|
|
| pet hair or other debds. |
Sound changes. | 2. | New carpet fuzz clogged air palh. | 2. | Check CLOG REMOVAL and clean |
|
|
|
| hose, |
D_ffleultyadjustingpile | 1. | Vacuum cleaner not in properupright | 1. | Place vacuum cleaner in the locked |
height set6ng |
| position. |
| uprightposition,tiltthe vacuumback |
|
|
|
| slightlyand adjust pile height, |
2O