Kenmore 116.35913, 116.35912 owner manual To Remove Light Bulb

Electrical Shock Or Personal Injury

Hazard

Disconnect electrical supply before performing maintenance to the unit. Failure to do so could result in

electrical shock or personal injury from the vacuum cleaner suddenly

starting.

TO REMOVE LIGHT BULB

1.Disconnect power cord from electrical outlet.

Rat		2.	Press han-
Screwdriver		dle	release
		pedal and			lay
		vacuum		clean-
		er	back.
		3.	Pry	light
		lens out at			slot
		in	rear	as
	Headlight	shown		on	both
		sides.		Rotate
	Lens

lens up and lift off.

CAUTION

Do not use a bulb rated over 9W (13V). During extended use, heat from the bulb could overheat surroundingplastic parts.

4.Remove the light bulb by pulling straight out.

5. TO replace the light bulb carefully insert fully into slot.

Note: See PARTS AND FEATURES for bulb number.

!CAUTION

Do not plug in or turn on untilthe vacu- um cleaner is completely reassem. bled.

6. To replace light

lens, place tab at front of lens into

slot. Rotate lens down and firmly snap into place.

18