Kenmore 116.35913, 116.35912 owner manual E Warning

E WARNING

Always unplug power cord from electri-

cal outlet before performing any ser- vice on vacuum.

TO REMOVE DUST BIN

Lift dust bin handle located at the top of the dust bin.

	Pull the handle up
Handle	and lift dust bin up
	and out of the vac-
	uum cleaner.
Dust
Bin

Hold		dust		bin		Dust Bin
over a trash con-
tainer.
Press		the		dust
bin	door		release
button		down-				Door
ward		to	release			Release
the	door.					Button
The	door			will
swing		open			and
the	debris				will
fall	into		the		trash
container.

Emptying

Shake the dust Door

bin to release

and debris that might hang in the filter ele- ment.

Note: See PRIMARY FILTER REMOVAL

Remove any clogs that might be located in AND CLEANING section. the suction port or filter port area.

After the dust bin is

	empty	of debris,
	firmly	close the
	door. Make sure
Filter Pot	you hear a "click"
	sound	to indicate
	that the door is fully
	latched.
Door	Door
	Latch

TO EMPTY DUST BIN

Before removing debris from dust bin it is a good idea to move the dust bin filter clean- ing lever back and forth several times.

Moving		the	lever	Dust BIn_.
back	and forth
				Filter	-
loosens		the	dust	Cleaning
and	debris		that
has	attached			Lever	_
itself to		the	filter
element		inside
the	dust	bin.

Rotate dust bin handle to the vertical posi- tion.

TO REPLACE

DUST BIN

Place dust bin back into vacuum cleaner

by insertingthe bot- tom first and tilting back with the dust bin

handle raised.

Lower the dust

bin handle to lock dust bin in

Dust Bin -

Handlenoticeable should

be heard.

14