Built-in Ethernet Indicators, Standby Button | Ericsson W3X guide

W3x Series Overview

2.5.4.4Built-in Ethernet Indicators

The Ethernet LAN connectors (Ethernet 1-4) have two built-in indicators each.

The left indicator shows the speed of data traffic between the Ericsson W3x and the connected client. If the speed is 100 Mbps, the indicator is green. When the indicator is unlit, the speed is 10 Mbps.

The indicator to the right is yellow when a LAN connection is established and flashes to show data traffic activity.

2.5.4.5Standby Button

The Standby button at the bottom of the front shows steady blue when the Ericsson W3x has finished the start-up procedure.

The button can be pressed to switch the Ericsson W3x to a standby (low- power) mode (equal to when the Ericsson W35 is running on optional battery power). The button shows red when the unit is in standby mode and only phone services are available.

1/1551-CRH 102 168 Uen Rev A 2008-12-16

13

Image 19

Ericsson W3X manual Built-in Ethernet Indicators, Standby Button

Contents

Ericsson W3x Series Disclaimer CopyrightTrademark List Contents LAN Telephony and Fax W35 only Battery W35 onlyPC Configuration Troubleshooting Glossary Structure of this Guide Introduction Related Documents Ericsson W30 Data Router Product Variants Overview of Interfaces on the Ericsson W30 W30 Data Router Wireless Broadband Services at Reliable High Speed Feature SummaryW35 Data and Voice Router Battery back-up Local Wireless Access with High-level SecurityVoice Services Fax Service Back Side Interfaces Housing Label Description Phone ResetLabel Description Ethernet 10-28VDC Interface Type Description Left Side InterfacesButton Right Side Interface Signal Quality IndicatorFront Panel Symbol Color Description 4.2 W30 LED Indicators 4.3 W35 LED Indicators Standby Button Built-in Ethernet Indicators Access and Login to the Web User Interface Configuration and Management Enter PIN Code Enter Password Enter password Inactivity Timeout Enter password page after inactivity timeout Overview Overview Alarm cause Description Alarms Network Information Enable the Wireless LAN Wireless LAN Configuration Wizard Network Name Wireless LAN Authentication WEP-64, WEP-128 Low security Open No securityWPA, WPA2 High security Open WPA/WPA2 Mixed High security WEP Encryption Key Wireless LAN WEP 64 BIT 3.3 WPA/WPA2 Passphrase Wireless LAN WPA Wireless LAN WPA2 Wireless LAN Configuration Wizard Confirmation Internet Internet Mode Service providerMobile Network Connection Details Link Status Text AuthenticationTraffic Statistics DNS PPP user name PPP passwordAuthentication Auto APN Unlock Operator Lock Unblock SIM Change PIN Cellular Band SelectionText Description Region 2G Settings 3G Settings LAN IP Address LAN Dhcp Server IP address range to Text Description Enable Dhcp serverIP address range From Leases LAN Port Status Enable Wlan Wireless LAN Data Rate Transmit Power dBmRegion Radio Channel Channel Scan for Wireless NetworksText Description MAC Address Network Name Text Description Network name Ssid Enable Ssid broadcastNetwork Name Ssid Wlan Security 8.3 WPA/WPA2 and Passphrase High security WEP and WEP Encryption Key Low security Whitelist Connected Devices Add Clients to the Whitelist Find a Wireless Client MAC Address NAT NAT Application Level Gateways UPnP IGDApplication Protocol Port Number Server Port Port ForwardingText Description NAT Port Server IP Port Forwarding Example Application Server Port Delete Port Forwarding Rule Edit Port Forwarding Rule How it Works File and Printer Sharing File Sharing Host Name and WorkgroupSafe Removal of a USB Device Text Description Storage device Printer SharingShare name Shared printer description System System Basic System Information Configuration Backup and Restore System Restart Restore from Backup File Restart Progress Message Software Update Software update complete Factory Reset Configuration and Management Event Log Event Log Persistent Logging Change Password Logout Telephony and Fax W35 only SIM Authentication PUK required Information TonesName PIN required Battery Function Installation of the Battery Obtain IP Settings Automatically IP SettingsWindows XP Windows Install the Wireless LAN Interface Wireless LAN SettingsConfigure Static IP Address Prepare the Wireless Clients Configure Access to the W3x Wlan USB Sharing Settings Check Workgroup Settings Set Up a Connection to a Shared Storage Device Access a Shared Storage Device Access a Shared Printer Printer Supporting the RAW Protocol Printer Supporting the Samba Protocol Finish in the Add Printer Wizard Select Do not share this printer option and click Next Restart Reset to Factory Default Settings LAN Connections IP address is defined Internet AccessIndication/Symptom What to do User Change TCP Settings Wireless LAN Connection Configuration Ansi Access to Shared Files or Printer Telephony and Fax Service W35 only Pstn Chap Challenge-Hanshake Authentication Protocol AP Access PointAPN Access Point Name Cdma Code Division Multiple Access Dhcp server Dhcp Dynamic Host Configuration ProtocolGprs General Packet Radio Service Hspa High Speed Packet Access IP Internet Protocol MAC address Media Access Control addressElectronics Engineers Imei International Mobile Equipment Identity PIN Personal Identification Number Pstn Public Switched Telephone NetworkPassphrase PC Personal Computer Subnet Ssid Service Set IdentifierSwitching Umts Universal Mobile Telecommunications Service WPA Wi-Fi Protected Access WEP Wired Equivalent PrivacyWireless Wlan Wireless Local Area Network