Configuration and Management
•The “NETWORK INFORMATION” section where the most important connection status information is collected. This information (among others) is also found on the Internet and LAN web pages respectively.
3.2.1Alarms
The “ALARMS” section on the Overview page includes detected active error conditions.
Events that generate an alarm are such that make it impossible to send or receive data, e.g. SIM card missing.
If there are no alarms currently detected the text "No alarms detected"
is displayed. If an alarm is detected, the Alarm 
indicator on the Ericsson W3x front panel is blinking, and the corresponding cause is displayed according to the table below:
Table 6 - Alarm cause description
Alarm cause | Description |
|
|
No SIM card detected | There is no SIM card inserted, or the |
| SIM card is not correctly inserted. |
|
|
Invalid SIM card | The inserted SIM card is invalid |
inserted |
|
|
|
No PIN code entered | No PIN code has been entered to |
| activate the Internet and voice services. |
|
|
Incorrect PIN code | The entered PIN code is incorrect. |
entered |
|
|
|
SIM card blocked | The SIM card has been blocked (due to |
| entering the wrong PIN code three |
| times). The PUK is required to unblock |
| the SIM card. |
|
|
SIM card permanently | The SIM card has been permanently |
blocked | blocked (due to entering the wrong PUK |
| code ten times). A new SIM card is |
| required. |
|
|
No Auto APN was found | The APN (Access Point Name) could |
| not be automatically configured based |
| on information on the SIM card. |
|
|
Alarm detection not | The alarm detection function is currently |
working | not working. |
|
|
Unknown alarm | An alarm that cannot be identified has |
|
|
19 |
