Installation of the Battery, Battery Function | Ericsson W3X

Battery (W35 only)

5	Battery (W35 only)

The Ericsson W35 can be powered by a rechargeable battery pack to provide voice service redundancy in the event of a total mains power failure. When mains powered, the Ericsson W35 will keep the battery charged.

Note: The battery is not fully charged when delivered. The charging time for an empty battery is about 4 hours. The battery will not charge if the environment temperature is above 40 degrees Celsius, due to over heating protection.

5.1Installation of the Battery

The battery is available as an accessory and is inserted between the

AC/DC adapter and the Ericsson W35.

Battery pack

Figure 50 - Battery pack and power adapter

5.2Battery Function

If a power failure occurs the Ericsson W35 automatically switches over to battery operation. In order to extend the battery time only voice services is available. Data services, such as USB, Ethernet and Wireless LAN functions will be unavailable.

The Standby button on the front of the Ericsson W3x is red when powered by battery (or when the Standby button has been pressed).

The stand by time is up to 4 hours if no telephone calls are made. Talk time is typically 3 hours. Battery time depends on the mobile network signal quality, battery age, and environmental temperature.

1/1551-CRH 102 168 Uen Rev A 2008-12-16

67

Image 73

Ericsson W3X manual Installation of the Battery, Battery Function

Contents

Ericsson W3x Series Disclaimer CopyrightTrademark List Contents LAN PC Configuration Battery W35 onlyTroubleshooting Telephony and Fax W35 only Glossary Structure of this Guide Introduction Related Documents Ericsson W30 Data Router Product Variants Overview of Interfaces on the Ericsson W30 W30 Data Router Wireless Broadband Services at Reliable High Speed Feature SummaryW35 Data and Voice Router Voice Services Local Wireless Access with High-level SecurityFax Service Battery back-up Back Side Interfaces Housing Label Description Ethernet Reset10-28VDC Label Description Phone Interface Type Description Left Side InterfacesButton Right Side Interface Signal Quality IndicatorFront Panel Symbol Color Description 4.2 W30 LED Indicators 4.3 W35 LED Indicators Standby Button Built-in Ethernet Indicators Access and Login to the Web User Interface Configuration and Management Enter PIN Code Enter Password Enter password Inactivity Timeout Enter password page after inactivity timeout Overview Overview Alarm cause Description Alarms Network Information Enable the Wireless LAN Wireless LAN Configuration Wizard Network Name Wireless LAN Authentication WEP-64, WEP-128 Low security Open No securityWPA, WPA2 High security Open WPA/WPA2 Mixed High security WEP Encryption Key Wireless LAN WEP 64 BIT 3.3 WPA/WPA2 Passphrase Wireless LAN WPA Wireless LAN WPA2 Wireless LAN Configuration Wizard Confirmation Internet Internet Mobile Network Connection Details Service providerLink Status Mode Traffic Statistics AuthenticationDNS Text Authentication PPP passwordAuto APN PPP user name Unlock Operator Lock Unblock SIM Change PIN Cellular Band SelectionText Description Region 2G Settings 3G Settings LAN IP Address LAN Dhcp Server IP address range Text Description Enable Dhcp serverFrom IP address range to Leases LAN Port Status Enable Wlan Wireless LAN Region Transmit Power dBmRadio Channel Data Rate Text Description MAC Address Scan for Wireless NetworksNetwork Name Channel Network Name Ssid Enable Ssid broadcastWlan Security Text Description Network name Ssid 8.3 WPA/WPA2 and Passphrase High security WEP and WEP Encryption Key Low security Whitelist Connected Devices Add Clients to the Whitelist Find a Wireless Client MAC Address NAT NAT Application Level Gateways UPnP IGDApplication Protocol Port Number Text Description NAT Port Port ForwardingServer IP Server Port Port Forwarding Example Application Server Port Delete Port Forwarding Rule Edit Port Forwarding Rule How it Works File and Printer Sharing File Sharing Host Name and WorkgroupSafe Removal of a USB Device Text Description Storage device Printer SharingShare name Shared printer description System System Basic System Information Configuration Backup and Restore System Restart Restore from Backup File Restart Progress Message Software Update Software update complete Factory Reset Configuration and Management Event Log Event Log Persistent Logging Change Password Logout Telephony and Fax W35 only SIM Authentication Name Information TonesPIN required PUK required Battery Function Installation of the Battery Obtain IP Settings Automatically IP SettingsWindows XP Windows Configure Static IP Address Wireless LAN SettingsPrepare the Wireless Clients Install the Wireless LAN Interface Configure Access to the W3x Wlan USB Sharing Settings Check Workgroup Settings Set Up a Connection to a Shared Storage Device Access a Shared Storage Device Access a Shared Printer Printer Supporting the RAW Protocol Printer Supporting the Samba Protocol Finish in the Add Printer Wizard Select Do not share this printer option and click Next Restart Reset to Factory Default Settings LAN Connections Indication/Symptom What to do Internet AccessUser IP address is defined Change TCP Settings Wireless LAN Connection Configuration Ansi Access to Shared Files or Printer Telephony and Fax Service W35 only Pstn APN Access Point Name AP Access PointCdma Code Division Multiple Access Chap Challenge-Hanshake Authentication Protocol Gprs General Packet Radio Service Dhcp Dynamic Host Configuration ProtocolHspa High Speed Packet Access Dhcp server Electronics Engineers MAC address Media Access Control addressImei International Mobile Equipment Identity IP Internet Protocol Passphrase Pstn Public Switched Telephone NetworkPC Personal Computer PIN Personal Identification Number Switching Ssid Service Set IdentifierUmts Universal Mobile Telecommunications Service Subnet Wireless WEP Wired Equivalent PrivacyWlan Wireless Local Area Network WPA Wi-Fi Protected Access