Ericsson W3X manual Internet Access, Indication/Symptom What to do, User, IP address is defined

Troubleshooting

		Indication/Symptom	What to do
			current password, use the Reset
			button to reset the Ericsson W3x to
			factory default configuration (see
			section 7.2). This will reset the login
			password to the default value
			(user).
7.4	Internet Access
	Table 26 – Internet access
		Indication/Symptom	What to do
		Cannot access the Internet from	Check the status of the Alarm
		any of my local devices.	indicator. If it is blinking, see
			the information in the “ALARMS”
			section on the Overview page.
			On the Internet page, verify that
			the Link status is Up and that an
			IP address is defined.
		The Internet connection is	Check the signal quality indicator
		unacceptable slow or regularly	on the front of the Ericsson W3x.
		dropping.
			The more segments displayed in
			the bar graph, the stronger the
			signal.
			Try to move the Ericsson W3x to
			another position or attach an
			external antenna (indoor window or
			outdoor roof mounted). External
			antennas are available as
			accessories to the Ericsson W3x.
			For optimizing the performance of
			the Internet connection, it might be
			necessary to change some TCP
			settings in the client PC as
			described in section 7.4.1 –
			Change TCP Settings.
		Cannot access a certain Internet	Check the NAT page to make sure

1/1551-CRH 102 168 Uen Rev A 2008-12-16 79