Troubleshooting
Note: A reset to factory default configuration cannot be undone. If you reset the Ericsson W3x to default configuration, all your previous configuration changes are replaced. If you have previously changed the password, the Enter password page will be displayed. You have to login to the web pages with the default password (user).
7.3 | LAN Connections |
| |
| Table 25 – LAN Connections |
| |
|
|
|
|
|
| Indication/Symptom | What to do |
|
|
|
|
|
| Cannot access the local network | Check the network cable and make |
|
| from a PC that is connected to one | sure that there is a physical |
|
| of the Ethernet ports on the | connection between the PC and the |
|
| Ericsson W3x. | Ericsson W3x and that at least one |
|
|
| of the corresponding LAN |
|
|
| connector indicators is lit. If not, |
|
|
| make sure that the cable is properly |
|
|
| connected or try with another |
|
|
| Ethernet cable. |
|
|
| Check that the PC is configured to |
|
|
| obtain IP address automatically |
|
|
| using DHCP. If not, change the PC |
|
|
| TCP/IP settings. For instructions, |
|
|
| see section 6.1.1 – Obtaining IP |
|
|
| Settings Automatically or refer to |
|
|
| the manual of your operating |
|
|
| system. |
|
|
|
|
|
| Cannot access the WUI on the | Make sure you are using the |
|
| Ericsson W3x. | correct LAN IP address in the web |
|
|
| browser. If the LAN IP address has |
|
|
| been changed and you do not know |
|
|
| the current IP address, use the |
|
|
| Reset button to reset the Ericsson |
|
|
| W3x to factory default configuration |
|
|
| (see section 7.2). This will set the |
|
|
| LAN IP address to 192.168.1.1 and |
|
|
| the web page address to |
|
|
| http://mbr or http://192.168.1.1. |
|
|
| Make sure you are using the |
|
|
| correct login password. If the |
|
|
| default password has been |
|
|
| changed and you do not know the |
78 |
