Ericsson W3X Auto APN, PPP user name, PPP password, Authentication, Protocol, Unblock SIM Card

Configuration and Management

	is used for SIM authentication.
Auto APN	If enabled, the APN (Access Point Name) is
	automatically configured based on information on the
	SIM card. If this fails, an alarm is raised (displayed in
	the ALARMS section on the Overview page as “No
	Auto APN was found”) the APN has to be provided
	manually in the “APN” field (see below).
APN:	The APN, which is a reference to the
	HSPA/UMTS/GSM Internet access point on the
	service provider’s network. The APN usually has the
	format <name.service_provider.country>.
PPP user name:	The Point-to-Point Protocol Internet mode user name,
	which is used for user authentication.
PPP password:	The Point-to-Point Protocol Internet mode password,
	which is used for user authentication.
Authentication	The authentication protocol (PAP or CHAP) to be
Protocol:	used when PPP is used for authentication.

If authentication is required because of a reset to factory default configuration, fill in the appropriate fields and click Apply to save the settings.

Note: Only enter details you have received from your service provider and leave other fields empty.

3.4.3.1Unblock SIM Card

If three attempts have been made with an incorrect PIN code, the SIM card is blocked and the Unblock SIM button is displayed besides the “PIN” field.

Figure 27 - Unblock SIM button

The PUK code is needed to unblock the SIM card. Click the button to display the Unblock SIM page:

Unblock SIM

32 1/1551-CRH 102 168 Uen Rev A 2008-12-16