Installation Instructions (cont'd)
Converting | the | Lower |
|
|
|
|
| |
Element (cont'd) |
|
|
|
|
| |||
9. Tighten | terminals | 2 and | 3 to ensure proper electrical | 12. The adjustment | dial | has a "D" shaped | opening | that matches |
connection. |
|
|
| a "D" shaped | shaft | on the thermostat. | Align | the opening in |
|
|
|
| the dial to the shaft and gently push the dial onto the shaft. | ||||
| AWARNING_ |
|
|
|
|
| ||
Failure to lighten terminal screws can cause a fire which |
|
|
|
|
| |||
can result in DEATH, SERIOUS BODILY INJURY, OR I |
|
|
|
|
| |||
PROPERTY | DAMAGE. |
| 1 |
|
|
|
|
|
10.Replace terminal cover on the thermostat, making sure the notch is in place over the tab.
13. Replace the access panel.
AWARNING
Make sure the thermostat is flush against the tank, the terminal cover is in place, and the insulation is replaced. Failure to do so can result in DEATH, SERIOUS BODILY
NJURY, OR PROPERTY DAMAGE.
l 1. Replace the insulation block so that it completely covers the thermostat and element.
14.Complete wiring to the water heater, or if completed, turn "ON" electric power to the water heater after filling the tank with water.
ACAUTION
Never use this water heater unless it is completely full ofl water. To prevent damage to the tank and heating ele- ment, the tank must be filled with water. Water must J flow from the hot water faucet before turning "ON"
power. | I |
12