Troubleshooting Guide (cont'd)

HIGH TEMPERATURE SHUT OFF SYSTEM (cont'd)

Remove the two screws securing the access panel and remove panel.

Remove the insulation block to expose the opening.

Reset the high limit by pushing in the red button marked "RESET".

NOT ENOUGH OR NO HOT WATER

In a new installation, the water heater may not be properly

connected. Make sure the cold water supply valve is open.

Review and check piping installation. Make sure that the cold water line is connected to the cold water inlet to the

water heater and the hot water line to the hot water outlet on the water heater.

Make sure the electrical supply to your water heater is "ON".

Check for loose or blown fuses in your water heater circuit. Circuit breakers weaken with age and may not handle their rated load and should be replaced.

Make certain the disconnect switch, if used, is in the "ON" position.

Check to see the electric service to your house has not been

--RESET BUTTON

interrupted. If this is the case, contact the electric company.

 

 

Are the thermostats

set

to the desired temperature?

See

 

"Temperature Regulation"

section.

 

Replace the insulation block so that it completely covers the thermostat and element.

Replace the access panel.

Turn "ON" electric power to the water heater.

If the high

limit must

be reset again, call Sears

Service

 

I Department to find out why the high limit turned "OFF"

I

! the electric

/i,

CAUTION

 

power.

 

 

 

If you had experienced very hot water and now no hot

water, the problem may be due to the high temperature shut off system. See "High Temperature Shut Off System'

in the "Troubleshooting" section.

During very cold weather, the incoming water will also be colder and it will require a longer time to become heated.

The hot water usage may exceed the opacity of the water heater. If so, wait for water heater to recover aher abnormal

demand. Also examine pipes and faucet's for possible water leaks.

If you can not determine the problem, then call the Sears

Service Department.

WATER IS TOO HOT

Adjust the thermostat to a lower setting. See the "Temperature Regulation" section.

23

Page 23
Image 23
Kenmore 153.320592 HT, 153.320492 HT, 153.320893 HT, 153.320892 HT owner manual Not Enough or no HOT Water, Water is TOO HOT

153.320592 HT, 153.320692 HT, 153.320893 HT, 153.320492 HT, 153.320892 HT specifications

Kenmore has long been synonymous with quality home appliances, and the Kenmore 153.320593 HT, 153.320492 HT, 153.320392 HT, 153.320393 HT, and 153.320493 HT models continue this tradition with their advanced features and technologies. These models are designed specifically for convenience, efficiency, and performance, catering to a variety of household needs.

One of the standout features of the Kenmore 153 series is its efficient heating technology, which ensures that water is heated quickly and evenly. This is essential for both cleaning and cooking applications, making it a versatile addition to any kitchen. The heating elements are designed for durability, promoting longevity and reducing the frequency of replacements.

These models also boast a user-friendly control panel, which simplifies operation. The intuitive design makes it easy for users to select their desired temperature and washing cycles. Furthermore, some units in this series are equipped with digital displays that provide real-time feedback on the appliance's operation, allowing homeowners to monitor performance at a glance.

Energy efficiency is another hallmark of the Kenmore 153 series. With the rising concerns about energy consumption, these models incorporate technology that minimizes electrical usage without sacrificing performance. This not only aligns with sustainability goals but also helps homeowners save on their energy bills.

Another impressive characteristic of the Kenmore 153 models is their built-in safety features. Overheat protection and automatic shut-off mechanisms are standard across the series, ensuring peace of mind when the appliance is in operation. These safety measures are particularly valuable in households with children or pets.

In terms of design, the Kenmore models reflect a modern aesthetic, with sleek finishes that complement a variety of kitchen decors. Their compact size ensures that they fit seamlessly into limited spaces, making them ideal for both small apartments and spacious homes.

Additionally, the durable construction of these appliances is designed to withstand the rigors of daily use. The materials used are resistant to wear and tear, ensuring that the units maintain their functionality and appearance over time.

Overall, the Kenmore 153.320593 HT, 153.320492 HT, 153.320392 HT, 153.320393 HT, and 153.320493 HT models represent a blend of innovation, practicality, and style. With their advanced features, energy efficiency, and commitment to safety, these appliances stand out as an excellent choice for those seeking dependable performance in their everyday tasks.