Kenmore 153.330401 owner manual Materials and Basic Tools Needed, Materials Needed

Materials and Basic Tools Needed

Materials Needed

To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materi-

als, depending on your type of installation.

iWater Heater Installation Kit

WATER HEATER INSTAL-

VENT ELBOW_.

EXPANSION TANKS FOR THERMAL EXPANSION CONDI- TIONS AVAILABLE IN 2 GALLON AND 5 GALLON CAPACITY THROUGH LOCAL SEARS STORE OR SERVICE CENTERS

WATER HEATER STAND 24"x24"x 18"

FOR USE WITH WATER HEATERS

INSTALLED IN RESIDENTIAL

GARAGES HAVING A DIAMETER 24"

OR LESS AND A RATED CAPACITY 75

GALLONS OR LESS

FLEXIBLE WATER

HEATER GAS CON-

NECTOR WITH

FITTINGS

DRAIN PANS

LATION KIT WITH FLEXI-

BLE CONNECTORS FOR 314" OR 112" THREADED OR COPPER PLUMBING

f

			AVAILABLE IN 20" DIAMETER FOR
			WATER HEATERS HAVING A DIAME-
	WATER	HEATER HEAT	TER 18" OR LESS AND	AVAILABLE IN
VENT PIPE	TRAPS	HELP REDUCE HEAT	28" DIAMETER FOR WATER HEATERS
	LOSS DUE TO THERMAL		HAVING A DIAMETER	26" OR LESS
	SYPHONING

Basic Tools

ADDITIONAL TOOLS NEEDED WHEN SWEAT SOLDERING

You may or may not need all of these tools, depending on ycour							• Tubing Cutters or Hacksaw
type of installation.	These		tools	can be	purchased	at your local
							•	Propane Torch
Sears store.							• Soft Solder
• Pipe Wrenches	(2) 14"						•	Solder Flux
							•	Emery Cloth
• Screwdriver
• Tin Snips							•	Wire Brushes
• 6 Foot Tape of Folding Rule
• Garden Hose
• Drill
• Pipe dope or Teflon Tape
								HACKSAW
GARDEN HOSE		6 FOOT		TAPE		PIPE		314" WIRE		BRUSH
			j			WRENCH
SLOT-HEAD		SCREWDRIVER
									I/2" WIRE BRUSH
PHILLIPS		SCREWDRIVER									PROPANE
					TIN	SNIPS					TORCH
								ROLL OF	LEAD	FREE
								SOFT	SOLDER
	ROLL OF TEFLON				TAPE
	(USE		ONLY	ON WATER
	CONNECTIONS)					DRILL		ROLL OF EMERY
										SOLDER FLUX	TUBING
PIPE DOPE (SQUEEZE		TUBE)						CLOTH
											CUTTER
(USE FOR WATER	AND

GAS CONNECTIONS)