LED STATUS

 

PROBLEM

0 FLASHES (LED NOT LIT)

Pilot light

is not lit or Thermopite

 

has not yet reached normal

 

operating

temperature.

RED LIGHT ON (SOLID)

Pilot light was recently extinguished

 

and the Thermopile is cooling

 

down.

1

FLASH (EVERY 3 SECONDS)

Normal

operation.

2

FLASHES

Pilot is

tit but the Thermopite is

 

 

not producing the required output

 

 

voltage.

 

CORRECTIVE ACTION

Turn Gas Control Valve/Thermostat knob to OFF. Wait 10 minutes, then attempt to relight Pilot by following the lighting instructions on the water heater's label. Until the Thermopite reaches its normal operating temperature, the Status Light wilt not blink, even if the Pilot is tit. It may take up to 90 seconds of continuous Pilot operation before the Thermopite reaches normal operating temperature and the Status Light starts to blink.

If the Status Light does not blink after three lighting attempts, check to make sure unit is getting gas.

Remove the outer door. Press reset button. Replace outer door. Turn Gas Control Valve/Thermostat

knob to OFF. Wait 10 minutes, then attempt to light Pilot by following the lighting instructions on the water heater's label. Look through the sight glass for the Pilot flame. If Pilot is not visible, the spark igniter or gas supply to the Pilot should be checked.

If the Pilot is visible and the Status Light does not blink after 90 seconds of continuous Pilot operation, the Pilot flame may not be heating the Thermopile sufficiently (weak Pilot) or the Thermopite may be defective, or wiring connectors may be loose.

Replace outer door and verify proper operation after servicing

NOTE: If the water heater has been operating but has stopped and will not re-light, check the flame-arrestor for signs of high temperature (blue or black) discoloration indicating a flammable vapor incident. If you suspect a flammable vapor incident has occurred, do not use this appliance. Immediately call a qualified technician to inspect the appliance. Water heaters subjected to a flammable vapors ignition wilt require replacement of the entire water heater. NOTE: Check the gas control valve/ thermostat and thermal switch for any loose wiring connections, correct immediately.

Turn Gas Control Valve/Thermostat knob to OFF. Wait 10 minutes for the Thermopite to cool, then attempt to relight Pilot by following the lighting instructions on the water heater's label. NOTE: This gas control valve/thermostat has built-in circuitry that requires waiting 10 minutes between lighting attempts. Until the Thermopile reaches its normal operating temperature, the Status Light wilt not blink, even if the Pilot is tit. It may take up to 90 seconds of continuous Pilot operation before the Thermopite reaches normal operating temperature and the Status Light starts to blink.

No corrective action necessary.

Turn Gas Control Valve/Thermostat knob to OFF. The Thermopite is probably defective, but loose wiring connections or a weak Pilot flame can also cause this symptom.

39

Page 38 Page 40
Page 39
Image 39
Kenmore 153.33114, 153.33115 manual Pilot light was recently extinguished, Thermopile is cooling, Down, Normal Operation
Page 38 Page 40

153.33114, 153.33115 specifications

The Kenmore 153.33115 and 153.33114 are high-efficiency dehumidifiers designed to effectively manage moisture levels in residential spaces, providing comfort and safeguarding homes against the damaging effects of excess humidity. Both models embody Kenmore's commitment to quality, innovative technologies, and user-friendly features, making them ideal choices for maintaining optimal indoor air quality.

One of the standout features of the Kenmore 153.33115 and 153.33114 is their powerful dehumidification capability. With the capacity to remove up to 70 pints of moisture per day, these dehumidifiers efficiently tackle dampness in areas of up to 1,500 square feet. This makes them suitable for various spaces, including basements, laundry rooms, and even larger living areas, ensuring a healthy environment free from mold and mildew growth.

The models are equipped with an adjustable humidistat, which allows users to set their desired humidity levels easily. This feature not only enhances user control but also ensures energy efficiency by allowing the machines to operate only when necessary. Alongside energy efficiency, these dehumidifiers are designed to comply with Department of Energy guidelines, making them an eco-friendly choice.

Both models also feature a continuous drainage option, enabling hassle-free operation without the need for constant manual emptying of the water tank. When the water tank reaches capacity, an automatic shut-off function prevents overflow, ensuring peace of mind for users.

In terms of convenience, the Kenmore 153.33115 and 153.33114 have a user-friendly digital control panel with an easy-to-read LED display. This intuitive interface makes it simple to adjust settings, check humidity levels, and monitor overall performance. Additionally, the inclusion of wheels and a lightweight design enhances portability, allowing users to move the dehumidifiers where they are needed most.

Another notable aspect is the enhanced air filtration system. These dehumidifiers come with a removable, washable filter that effectively captures dust, allergens, and other airborne particles, contributing to better indoor air quality.

In conclusion, the Kenmore 153.33115 and 153.33114 are exemplary dehumidifiers that combine efficient moisture removal, user-friendly features, and eco-conscious designs. With their robust performance, effective humidity control, and added convenience features, these models stand out as reliable solutions for maintaining a comfortable and healthy indoor environment.
Top Page Image Contents