Hitachi Koki USA 52 Terms and Symbols for the Type of Originals and Copy Paper, Width and Length

v

Terms and Symbols for the Type of Originals and Copy Paper

A few special terms and symbols are used in this manual to designate types of originals and copy paper. This page explains about these terms and symbols.

Feeding Direction (copy paper path)

In this copier system, copy paper is taken up from the right-hand side of the copier and fed through the copier toward the left-hand side, face up onto the Copy Tray. In the figure below, the direction in which the copy paper is fed, as indicated by the arrow, is called the “feeding direction.”

1155O761AA

“Width” and “Length”

When we talk about the size of the original or copy, we call side A “width” and side B “length.”

A:Width

B:Length

1139O1610A

Terms and Symbols Used

<Lengthwise >

When the original or copy has a “length” longer than its “width,” we call it “lengthwise” and use symbol

“L” or “ .”

1139O1610A

<Crosswise >

When the original or copy has a “length” shorter than its “width,” we call it “crosswise” and use

symbol “C” or “ .”

1139O1620A