
5. Selecting the Finishing
Hole Punch
1 | Touch the desired finishing function key. | |||
Touch | Hole Punch | . | ||
|
1155P014CB
NOTES
•The size of the copy paper for Hole Punch is 11²×17 ²L, LegalL, LetterL and LetterC only.
•Hole Punch is not possible in the Interrupt mode.
•When making copies in the Hole Punch Mode, make sure to load the originals into the Document Handler in the correct direction.
☞p.
<Only when the Finisher
•The number of punch holes can be changed between
Knob located inside the Finisher.
*When changing the setting for the number of
holes to be made, be sure the marks are aligned.
Useful Tips
•If you do not select a
OriginalCopy
1155O789EA
OriginalCopy
1155O790EA
•When making copies from either the 11 ²´17² or LegalL size, the copier autmatically speify the hole punching position as shown below.
OriginalCopy
1155O791EA
Making Copies Chapter 3
Knob
1155O723AA
Pull out Knob:
Push in Knob:
*The number of punch holes can be graphically identified on the Display.