|
|
| ||
| 7. Auxiliary Functions |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Auxiliary functions |
|
|
|
|
|
|
|
|
| Panel Resetting |
| Auto Shut OFF |
|
| The Panel Reset key resets all control panel |
| The Auto Shut OFF function shuts down the | |
| settings to default settings including the number of |
| copier a given period of time after the copier has | |
| copies and zoom ratio. The settings just made |
| been used last. The initial setting is 90 min. | |
| would also be cleared. |
|
|
|
|
|
| Useful Tip | |
| Useful Tips | |||
|
| The time for the copier to enter the Auto Shut | ||
| • The Panel Reset key enables you to cancel all |
| OFF mode can be selected from 15 to 240 min. | |
| previous settings at the touch of the key. |
| The Auto Shut OFF function can even be | |
| • To avoid miscopy, try to press this key before |
| disabled. | |
| making any setting for your own copy job. |
| For details, see User's Choice. ☞p. | |
|
|
|
|
|
|
|
|
|
|
| Auto Panel Reset |
| Energy Saver |
|
|
|
|
|
|
to Know Your Copier Chapter 2
If no key on the control panel is pressed within 1 min. after a copy cycle has been completed or copying settings made, the Auto Panel Reset function is activated to return the copier to the default settings.
Useful Tip
The time for the copier to enter the Auto Panel Reset Function can be selected from among “30 sec.”, “1 min.”, “2 min.”, “3 min.”, or “5
min.” For details, see User's Choice. ☞p.
Auto Copy Start
If you load originals into the document handler or place an original on the Glass and press the Start key while the copier is warming up after it has been turned ON, the Auto Copy Start function allows that copy process to be started as soon as the copier completes warming up.
If the copier is shut down when it is not in use, it takes the copier some time to complete the warm- up cycle. Instead of turning the copier OFF, it’s a good idea to use the Energy Saver mode which will minimize the time for the copier to complete the
To set the copier into the Energy Saver mode, you need only to press the Energy Saver key. Or, a given period of time after the copier has been touched last, it automatically enters the Energy Saver mode. The initial setting is 15 min.
To cancel the Energy Saver mode, press any key on the control panel.
NOTE
The copier is automatically shut down if the Auto Shut OFF function is activated while it is in the Energy Saver mode.
Useful Tip
The time for the copier to enter the Energy Saver mode can be selected from 1 to 240 min. For details, see User's Choice. ☞p.
