Hitachi Koki USA 52 manual Original Copy Default, Language Selected, Mixed Original Detect

Models: 52

1 207
Download 207 pages 32.61 Kb
Page 147
Image 147

Useful Tips

• When “100 Accounts” is selected, the User’s Choice functions of 1/6 to 4/6 can be set for each account after the corresponding access code has been entered. Note, however, that when “100 Accounts” is selected, the listing of User’s Choice displayed on the Touch Panel is from 1/4 to 4/4 .

The administrator can make the User’s Choice settings in common with all 100 accounts after “100 Accounts” has been

selected.

With the Touch Panel prompting you to

enter the access code, press the Utility key.

Touch User’s Choice .

Enter the administrator number from the 10-Key Pad.

* This allows the administrator to make the settings for 1/6 to 6/6 .

NOTE

The User’s Choice settings in common with 100 accounts for 1/6 to 4/6 are not valid for

the accounts for which the individual User’s Choice settings have been made after “100 Accounts” was selected.

4-15

5. User’s Choice

1/6

Original Copy Default

Specify the original copy type automatically selected when power is turned ON or panel reset.

The initial setting is 1-Sided 2-Sided. Consult your Technical Representative if you want to change the setting to 1-Sided 1-Sided.

Language Selected

Select the language of the Touch Panel messages. The initial setting is “English.”

Mixed Original Detect

Select whether to default to Mixed Original Detection (“ON”) or not (“OFF”) when power is turned ON or panel reset.

The initial setting is “OFF.”

*If the following combination is set at a time in User’s Choice, the Mixed Orig. Detect will be

automatically canceled and the copies are

made in 1

2 copy mode.

 

- Original

Copy Default:1-sided 2-sided

- Mixed Orig. Detect:

ON

Memory Recall

Select whether to enable (“ON”) the function that allows you to use the same image data of the copy cycle that has just been completed or not (“OFF”).

The initial setting is “OFF.”

Auto Paper/Auto Size

Specify the default mode selected automatically when power is turned ON or panel reset, either “Auto Paper,” “Auto Size,” or “Manual.”

The initial setting is “Auto Paper.”

Tray Priority

Using the Utility Mode Chapter 4

Specify the default paper source that is automatically selected.

The initial setting is “1” (1st Drawer).

Page 147
Image 147
Hitachi Koki USA 52 Original Copy Default, Language Selected, Mixed Original Detect, Memory Recall, Auto Paper/Auto Size