5. User’s Choice
4/6 |
| 5/6 |
|
|
|
Confirmation Beep
Select whether to turn “ON” or “OFF” the beep that sounds each time a key on the Touch Panel is touched.
The initial setting is “ON.”
Universal Tray
Select the default paper size detection for the Universal Tray, either Auto Detect or Custom Size.
The initial setting is “Auto Detect.”
Using the Utility Mode Chapter 4
Special Paper
Designate a drawer for special paper.
The initial setting is “Normal” for all drawers. See p.
Auto Panel Reset
Select the time it takes the auto panel reset function to be activated from among “30 seconds,” “1 min.,” “2 min.,” “3 min.,” or “5 min.,” or not activate the function at all (“No Reset”).
The initial setting is “1 min.”
Energy Save Mode
Set the time it takes the copier to enter the Energy Saver mode, from 1 min. ~ 240 min. (in 1 min. increments).
The initial setting is “15 min.”
Plug-In Counter Reset
Select whether to reset the panel (“ON”) or not (“OFF”) when the
The initial setting is “ON.”
Auto Shut Off
Select the time it takes the Auto Shut Off function to be activated, from 15 min. ~ 240 min. in 1 min. increments. Auto Shut Off shuts down the copier a given period of time after the last operation.
The initial setting is 90 min.
*A setting is also possible to disable Auto Shut Off.
