Kenmore 48487 manual Press Start to act rate, Remove Kneading Paddle

Step 9. Start Cycle _,_.,.. ,__'_

Press START to act rate the

Breadmaker, The breadmak-

er has already calculated your various settings and selections, and your recipe is now on its way to being prepared,

Step !!. Remove Bread from Bread Pan

Remove loaf of bread from Bread Pan

as soon as the Breadmaker has com-

pleted the baking cycle.

Hold Bread Pan upside down a few

First, the machine mixes the ingredi- ents, Then, it begins the Kneading process, During this process, the yeast begins to activate, The Viewing Window may begin to "fog" with con- densation, This is a normal part of the process, The condensation wi!! gradual. ly disappear durtng baking.

Whole Wheat cycles have a "rest" period for up to 30 minutes before kneading begins, No movement occurs in the pan, This is normal.

For special cycles, such as Jam, the Breadmaker follows the processes outlined in the cycle charts at the end of this manual.

Step !0. Stop Cycle/

Remove Bread

Pan

When the bread is done, the machine will beep, Press and hold the STOP button, Put on protective oven mitts and remove Bread Pan,

Remember that the Bread Pan and the bread loaf are both very hot after the Baking Cycle! DO NOT place either on a tablecloth, plastic surface, or other surface which might scorch or melt,

If STOP is not pressed, a Keep Warm Cycle begins. This wil! help keep the

bread from becoming soggy, For best results, remove bread immediately after

Baking cycle is complete.

The Keep Warm Cycle does not apply to Dough, Batter Breads/Cakes and Jam

cycles.1

inches from countertop and gently shake out the loaf of bread.

Place loaf of bread on a wire rack or

other ventilated cooling surface to coot. Allow bread to cool !5.30 minutes

before slicing.

Step 12, Remove Kneading Paddle

Be sure to remove Kneading Paddle before slicing,

CAUTION: The Kneading Paddle may be very hot, Never remove it from hot bread with bare hands.

The Kneading Paddle may stick in the loaf of bread, If it does, use a non-metal utensil to gently remove it from the bread, taking care not to scratch the paddle. Use a knife with a serrated edge for best slicing.

Step 13. Unplug Breadmaker

Always unplug your Automatic

Breadmaker immediately after use.