Kenmore 587.15072, 587.15074, 587.15073 Status Indicator Lights, Air Dry, Lock On, Delay, Hou,s

Operating Instructions

Air Dry

The AIR DRY option saves electricity since the heating element is off during drying portion of cycle.

LOCKON

When selected, the light above the pad will come on and remain on until end of cycle. To speed the drying process, open the door slightly after the cycle is complete. Some water droplets may remain on door and tub and in areas where dishes touch silverware basket and rack.

To select heated dry, press the pad a second time. The light above the pad will turn off. Heated dry provides faster drying since the heating element is on during the drying portion of the cycle.

You may see water vapor coming from the vent during the drying portion of cycle. The vent is closed during washing to hold moisture and sound inside and then opens for drying. The drying option may be changed at any time during the cycle and affects only the drying period.

Opening the door longer than one minute during the dry cycle cancels the selected dry program.

Lock On

Lock the controls to prevent children from accidently changing the cycle or starting the dishwasher.

LOCKON

To lock the controls, press and release the AIR DRY pad, then press and hold the AIR DRY pad for 5 seconds. The LOCK ON light will come on and no new selections can be made until the lock is released. To unlock the controls, press the AIR DRY pad for 5 seconds until the LOCK ON light goes out.

(continued)

Delay			Hours
	Hou,s		The DELAY HOURS option allows you to
2	4	6	delay starting your dishwasher up to 6 hours.
o	o	_

Press the DELAY HOURS pad once for a 2-hour delay, twice for 4 hours and three times for 6 hours. A light will come on indicating the delay start hours and will remain on until cycle starts.

To cancel the DELAY HOURS option and begin the cycle before the delay period is over, press the START/ CANCEL pad.

To Cancel a Cycle

You can cancel a cycle anytime during the

cycle. Press START/CANCEL pad and the dishwasher will start a 90 second drain. At

the end of the drain, select the desired cycle.

Status Indicator Lights

WASHmNG

SENSING

9B, DRYING

_ANITIZED

CLEAN

The WASHING light comes on at the beginning of cycle and remains on until the end of the final rinse.

The SENSING light comes on at the beginning of the selected cycle and will remain on until the end of the

sensing sequence.

The DRYING light indicates the drying portion of the

cycle. The light will come on when either drying option is selected.

When the SANITIZE option is selected, the SANITIZED light will glow when the SANITIZE cycle is finished. If

the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted. The light will remain on until the door is opened.

The CLEAN light will come on at end of cycle and remain on until door is opened.

10