WARNING
Do not operate with a clogged
EXHAUST FILTER
HEPA
The exhaust filter cartridgemust be replacedwhen dirty. Replace the filter when the entire surface area is covered evenly. The filter CANNOT be washed as it will lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for exhaust filter number.
1. Pull out and
up on the exhaust filter
cover to remove from the vacu-
um and lay aside.
2. Pullthe exhaust
tilter up and out
Filter from the rear of the vacuum.
3.Replace the exhaust filter
cartridge. Place the new
filter into the vacuum with the foam seal
facing | Filter | i | |
towards | |||
the |
| ||
vacuum. |
|
| |
| 4. Replace | the | |
| exhaust filter | ||
| cover by placing | ||
| the two tabs on | ||
| the filter cover | ||
| into the slots on | ||
| the vacuum | and | |
| rotate into place | ||
Tabs | until it snaps | ||
closed. |
| ||
15
