The vacuum cleaner creates suction that |
|
|
|
picks up dirt. Rapidly movingair carries the | /'/"_'_ |
|
|
dirt to the dust bag throughthe airflowpas- | /) |
|
|
sages. The dust bag lets the air pass | _/_ | • |
|
through, while it traps the dirt. | J/"f |
|
|
For best cleaning results, keep the |
| / |
|
flow passage open. Check the starred _,,_/" |
| /_ | Motor |
areas occasionallyfor clogs. Unplug L#Y |
| Ii | |
|
|
| Safety |
|
|
| Filter Exhaust |
from outlet before ch_ |
| _, |
|
BAG CHANGING
For best cleaning results, the dust bag should be changed often. The electronic bag/hose check indicator will come on when
the bag needs to be changed or the airflow is blocked.
NOTE: See PARTS AND FEATURES for Bag Number.
1. Unplugcord from wall outlet.
2. Remove hose
from canister.
3. Pull hood
release out and up, then lift canister
hood.
4.Disengage cardboard tab from
red bag mount by pulling away and lifting up.
5.Pull bag out of
the red bag mount.
6. Check the
motor safety filter and
replace, if
necessary.
Mount
7.The red bag mount will flip forward after removing bag. This will prevent the lid from
closing until a new bag is installed.
Note: DO NOT bend or crease the middle
of the cardboard when installing the bag into the bag mount slots.
8.Rotate red bag mount down and
install bag into slots per instructions pushing down until the cardboard tab locks into position and the holes align. Tuck the bag
securely into the bag cavity so that none of it is able to be pinched by the hood.
9.Close and latch canister hood.
10.Reinstall hose.
11.Plug cord into wall outlet.
NEVER REUSE A DUST BAG.Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum motor. Change
bag more often when vacuuming these materials.
13
