POWER-MATE e STORAGE
The lower wand |
|
has a "U" shaped | 4, |
tlange in the area | _!" |
where the power |
|
cord attaches. The |
|
base has a"U" |
|
shaped slot near |
|
the front. |
|
The flange allows
the wands and
with the canister to conserve storage space. The canister must be stored on end for this feature to be used.
To attach the
The wand will slip out of the slot as it is lifted up for use and will slide into the slot as it is
lowered for storage.
THERMALPROTECTOR
This vacuum has a thermal protector which
automatically trips to protect the vacuum from overheating. The thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum.
To reset: Turn off and unplug the vacuum from the outlet to allow the vacuum to cool
Check for and remove any clogs. Also
check and replace any clogged filters.
Wait approximately 50 minutes and plug the vacuum in and turn back on to see if
the thermal protector has reset. In some cases, the unit may suddenly restart. DO NOT leave unattended.
ELECTRONIC BAG/HOSE CHECK INDICATOR
Ele_onlc | The light comes |
Bag/Hose | on whenever |
Check Indicator | the airflow |
| |
| becomes |
| blocked, dust |
| bag needs |
| changing or |
| canister safety |
| filter needs |
| cleaning. |
NOTE: The light may come on when using certain attachments, due to reduced airflow through attachment.
Refer to TROUBLESHOOTING.
STAIR GRIP
During normal operation while the vacuum is in the horizontal position, the caster wheel rotates freely 360 ° .
The Stair Grip feature allows
the caster wheel to lock in
position when the unit is
rotated 25 °
from horizontal
into a vertical
position in order for the
vacuum to rest on stairs.
12
