I. Using your Dishwasher
_,. Dishware Preparation
1. General Guidelines
2
_I DO not
excessive grease.
c)Items having
require soaking and
B. Loading the Dishwasher
1. General Guidelines
a)Check the Materials section of this manual if you are unsure about an item's dishwasher suitability.
b)Load only
_Load items so that water can reach every part of every item. Place pots, pans, cups, bowls, and glasses upsidedown in
the racks.
e)Separate items of different metals.
2. Top Rack Accessories
Automatic Adjustability Top Rack Height Adjustment
The top rack can be raised to accommodate items up to 8'_ (20cm) in the top rack and 14" (36cm) in the bottom rack, or
lowered to accommodate items up to 10" (25cm) in the top rack and 12" (30cm) in the bottom rack.
To lower the top rack:
_I Pull the top rack out of the dishwasher until it stops rolling. Press the blue Automatic Adjustability handles inward as
shown in Figure 1. The rack will drop to its lowered position.
NOTE: Before you push the top rack back into the
e)Push the top rack back into the dishwasher.
Flip Tines
Flip Tines fold down to make loading the racks easier in some instances.
t)Grasp the tine stem as shown in Figure 3 and fold the tines downward.
Cup Shelves
g)Grasp the Cup Shelves as shown in Figure 4 and fold them down,
4
To raise the top rack:
c)Pull the top rack out of the dishwasher until it stops rolling.
o)Grasp the top of the rack above the Automatic Adjustability handles and pull it upward as shown in Figure 2 until the Automatic Adjustability handles lock the rack into position (you do not need to press the Automatic Adjustability handles in order raise the rack).
h)Place cups
3. Loading the Top Rack
NOTE: Check the Wash Cycle Options section of this manual for information on the Top Tier Only TM cycle.
a)Figure 5 shows a typical mixed load in the top rack.
Dishware Preparation | Loading the Dishwasher | 5 |