Kenmore 790.9805 manual Changing Between 12 or Hour, Day Display, To Set Add 1 Minute Feature

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.

To Set the Clock

The L_ pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the appliance is first plugged in, or when the power supply to the appliance has been interrupted, the timer in the display will flash.

Press STOP pad to get the timer and ovens ready to use.

To set the clack

1. Press _ pad. "CLO" and the current time of day will appear in the display.

2.Press A or V pad to set the correct time of day. Wait 5 seconds to accept the change or press STOP pad to reject the change. The new time of day wiJl appear in the display.

Changing Between	12 or		24	Hour	Time	of	Day	Display:
1. Press and hold _	pad	for	6 seconds.		"CLO"	and	the	current time of day will appear in the display. A beep will sound
and 'q2h" or "24h" will		appear		in the	display.

2.Press A or v pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or "24h'.

3.Wait 5 seconds to accept the change or press STOP pad to reject the change.

4.Reset the correct time as described in To set the Clack above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

To Set the Minute Timer

The TIMER SET/OFF pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other oven control

functions, except during a self clean operation. To set the Timer

1.Press TIMER SET/OFF pad. _-- --"will appear and "TIMER" will flash in the display.

2. Press A or V pad to set the desired time in the display. Wait 5 seconds and the time will begin to count down with the set time and "TIMER" will stay in the display.

3.When the set time has run out, "End" and "TIMER" will show in the display. The clock will sound with 3 beeps every 7 seconds until TIMER SET/OFF pad is pressed.

To cancel the Minute Timer before the set time has run out: Press TIMER SET/OFF pad. The display will return to the time

of day.

To Set Add 1 Minute Feature

The ADD 1 MINUTE pad is used to set the Add I Minute feature. When the Add 1

Minute pad is pressed, I minute is added to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the ADD MINUTE pad is pressed, the Kitchen Timer feature will become active and will begin counting down from ] minute.

Temperature Conversion (Fahrenheit / Celsius)

The BROIL pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens wi[[ be changed at the same time.

To change dlsp[ay from Fahrenheit to Ce[slus or Ce[slus to Fahrenheit

1.Press BROIL pad and hold for 6 seconds. A beep will sound, "---"will appear and "BROIL" will flash in the display. After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.

2.Press A or v pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C':

3.Wait 5 seconds to accept the change or press STOP pad to reject the change.

To Operate the Oven Light(s)

The interior oven light(s) will automatically turn ON when the oven door is opened. Press (_) to turn the interior light(s)

ON and OFF whenever the door is closed. 13