Kenmore 790. 4788 manual Consumer Defined Control, Control Operation, Silent control operation

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The (s_ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents

v

the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

INSTRUCTIONS

To activate the Oven Lockout feature

1. Press and hold _ for 3 seconds.

V

2.After 3 seconds "Loc" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure t ).

PRESS

Q for 3 seconds

DISPLAY

Figure 1

To reactivate normal oven operation:

t. Pressandhold@for3seconds.Abeepwillsound.The "DOOR Q for 3 seconds

LOCKED" will flash inthe display until the oven door has completely unlocked (Figure 2).

2.The wall oven is again fully operational.

Figure 2

Setting Silent	Control Operation
The DELAY TiME	_	and FLEX CLEAN _	pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

To change control from normal sound operation to

silent control operation

1.To tell if your range is set for normal or silent operation press and

hold _.	"==:=="will appear and "DELAY" will flash	inthe display
(Figure	3). After 7 seconds "SP" (Speaker) will appear	in the display

(Figure4).

PRESSDISPLAY

Figure 3

Q

for 7 seconds

2. Press _	to switch between normal sound operation and silent
operation mode. The display will show either "SP" (Figure 4) or
"=="(Figure	5).

If "SP" appears (Figure 4), the control will operate with normal sounds and beeps. If "=="appears (Figure 5), the control is in the silent operation mode.

Q

Figure 4

Figure 5

3. Press	to accept the change or press Q	to reject the	: START : Ot
			.................... Q
change.

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

11