Kenmore 790. 4789, 790. 4788 manual Consumer Defined Control Features

Consumer Defined Control Features

Setting Temperature Display --Fahrenheit or Celsius:

The BROIL _ Broil and FLEX CLEAN @ pads control the Fahrenheit or Celsius temperature display modes. The

oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

INSTRUCTIONS

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press

Broil (Figure 1) and hold for 7 seconds; "---" will appear and

"BROIL" will flash in the display and a beep will sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 2). If "C" appears, the display is set to show temperatures in Celsius (Figure 3).

2. Press _ to switch between Fahrenheit or Celsius display

modes. The display will show either "F" (Figure 2) or "C" (Figure 3).

3.Press :START;:to accept the change or press sT_ to reject the change.

PRESSDISPLAY

Figure 1

for 7seconds

Figure 2

@

Figure 3

or

.................Q

12