Not dispensing ice. Not all of the doors are closed completely.
The dispenser display is locked.
Ice is not selected on the dispenser.
The ice dispenser is not used often.
Ice bin is not installed correctly.
New installation.
Ice will not dispense if any of the refrigerator doors are left open.
Press and hold the Lock button for 3 seconds to unlock the control panel and dispenser.
The dispenser can be set for ice or water. Make certain that the control panel is set for the proper operation. Press the Ice Select button on the control panel to cycle through the ice options.
Infrequent use of the ice dispenser will cause the cubes to stick together over time, which wilt prevent them from properly dispensing. Check the ice bin for ice cubes clumping/ sticking together. If they are, break up the ice cubes to allow for proper operation.
Be sure to correctly install the ice bin into
position. Refer to Using your Refrigerator for removal and installation instructions.
Wait 12 to 24 hours after icemaker
installation for ice production to begin. Wait 72 hours for full ice production.
The delivery chute is clogged with frost or ice fragments.
Eliminate the frost or ice fragments by removing the ice bin and clearing the chute with a plastic utensil. Dispensing cubed ice can also help prevent frost or ice fragment buildup.
Dispensing | warm | New | installation. |
|
|
|
|
| Allow | 24 hours after | installation | for the water | ||||||||
water, |
|
|
|
|
|
|
|
|
| storage | tank to | coot | completely. |
|
|
| ||||
|
| The water dispenser | has | been | used recently | The unit | has a | 12 oz water storage | tank | inside | ||||||||||
|
| and | the | storage | tank | was | exhausted, | the refrigerator. |
|
|
|
|
|
|
| |||||
|
| The refrigerator | is connected | to | a hot water | Make | sure the | refrigerator | is connected | to a | ||||||||||
|
| line. |
|
|
|
|
|
|
| cold | water | pipe. |
|
|
|
|
| |||
Refrigerator | or | Controls | are not | set | correctly | for | conditions. | If the | temperature | is too | cold, raise | the |
| |||||||
Freezer section is too |
|
|
|
|
|
|
|
| temperature | setting | one | increment |
| at a | time | |||||
cold. |
|
|
|
|
|
|
|
|
| (refer | to | the | Setting | the | Controls | section). | ||||
|
|
|
|
|
|
|
|
|
| When changing |
| control settings, wait 24 hours | ||||||||
|
|
|
|
|
|
|
|
|
| before | making |
| additional | adjustments. |
| |||||
41
