BASE GRILLE INSTALLATION

To remove the base grllle:

1)Open the Freezer Drawer. (Drawer not shown for clarity.)

2)Once the drawer is open, and there is sufflcient

clearance, remove the screws on the top of the cover.

To replace the base grllle:

Place the cover into position and then insert and tighten the screws.

PRIOR TO USE

1.Clean your refrigerator thoroughly and wipe off all dust that accumulated during shipping.

2.Instatt accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment.

3.Allow your refrigerator to run for at least two to three hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.

INSTALLATION (continued)

lo To avoid noise and vibration, the unit must be leveled and installed on a solidly constructed floor, if required, adjust the leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly. Turn the leveling legs clockwise to raise the unit or counterclockwise to lower it. (See LEVELING AND DOOR ALIGNMENT.)

NOTE: installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended.

oinstall this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected.

o Select a place where a water supply can be easily connected for the automatic icemaken

NOTE: The water pressure must be between 20 and 120 psi on models without a water filter and between 40 and 120 psi on models with a water filter.

oToo small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors.

INSTALLATION

The refrigerator should always be plugged into its own individual properly grounded electrical outlet rated for 115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes. This provides the best performance and also prevents

overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a

separate circuit serving only this appliance be provided.

Shock Hazard:

To reduce the risk of electric shock, do not install the

!

refrigerator in a wet or damp area.

 

10

Page 9 Page 11
Page 10
Image 10
Kenmore 795.7103 manual Base Grille Installation, Prior to USE, Shock Hazard, To remove the base grllle
Page 9 Page 11

795.7103 specifications

The Kenmore 795.7103 is a top-of-the-line French door refrigerator that exemplifies modern design and functionality, catering to the needs of contemporary households. With an elegant stainless-steel finish, the refrigerator not only enhances the aesthetics of your kitchen but also provides durability and easy maintenance.

One of the standout features of the 795.7103 is its spacious interior, offering over 27 cubic feet of storage capacity. The thoughtful layout includes adjustable shelves, crisper drawers, and door bins that maximize organization. The crispers are specifically designed to maintain optimal humidity levels, ensuring that fruits and vegetables remain fresh and flavorful for longer periods.

Equipped with advanced cooling technologies, the Kenmore 795.7103 utilizes a multi-air flow system that circulates cold air evenly throughout the refrigerator. This feature helps eliminate hot spots and ensures that every shelf maintains the desired temperature, preserving your food with precision. In addition, the refrigerator boasts a SmartSense temperature management system which continually monitors the internal environment, automatically adjusting to keep your perishables at their best.

The Kenmore 795.7103 also incorporates cutting-edge energy-saving technologies. It is Energy Star certified, meaning it meets strict efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only reduces energy costs but also contributes to environmental sustainability, making it a smart choice for eco-conscious consumers.

For added convenience, the refrigerator comes equipped with a water and ice dispenser located on the exterior. This offers quick access to chilled, filtered water and crystal-clear ice without the need to open the fridge. The dispenser is also designed to accommodate tall pitchers and containers, making it user-friendly.

Another noteworthy characteristic of the 795.7103 is its smart connectivity features. When paired with a compatible smart device, you can monitor and control your refrigerator's settings remotely. This connectivity allows you to receive alerts when doors are left open or if there's a temperature fluctuation, ensuring peace of mind.

Overall, the Kenmore 795.7103 embodies a blend of style, efficiency, and technology, making it an exceptional choice for anyone looking to upgrade their kitchen appliance. Whether it's the spacious interior, advanced cooling systems, or convenient features, this refrigerator stands out as a reliable and stylish addition to any home.
Top Page Image Contents