CARE AND CLEANING

Removable Parts

CLEANING MATERIALS

- Dishwashing detergent

Warm water * Soft cloth

Molded Rib

Groove "

Stem

Clear i_

Spring Clip

TOrREMOVE

1.Be sure the control knob is in the off position.

2.Pull straight off the stem.

Using a piece of string can make

removing the knob easier. Slip the

string under andaround the knob, pulling straight out.

TO CLEAN

Wash the knobthoroughly with soapy

water. Dry completely with a soft cloth.

DO NOT let the knob soak

TO REPLACE

1.Check the back of the knob. The

molded rib of the knob is designed

to fit perfectly onto the knob stem.

2, Align the molded rib to the clear groove in the knob stem.

3.Push the knob back as far as it wilt go.

rII II II I IIilllllll i

 

 

switch

is

inthe

off

 

 

position.

Donot

 

Waituntil

the

bulb

has

 

cooled

and

use

a

dry

cloth.

Never

touch

the live

collar

of

the

bulb.

If

you

are

replacing

a broken

light

bulb

make

 

_sure

the

power

supply

is

off.

J

Live

Bulb

TO REMOVE THE COVER

1.Disconnect electrical power to the oven at the main circuit breaker or fuse box.

2.Grasp the glass cover and turn 1/4

turn counterclockwise until the tabs of the glass cover clear the grooves of the glass retainer,

REPLACE THE LIGHT BULB

Unscrew the !ight bulb and replace it

with a 40-watt home appliance bulb.

TO REPLACE COVER

1.Place the tabs of the glass cover

into the grooves of the glass retainer.

2.Turn the glass cover 1/4 turn in the

clockwise direction.

3.Reconnect the electrical power to the oven.

For improved lighting inside the oven, clean the glass cover frequently using

a wet cloth. Caution= This should

only be done when the oven is

completely cool.

22

Page 22
Image 22
Kenmore 911.46565, 911.46566 Removable Parts, Switch Inthe Off Position Donot, To Remove the Cover, Replace the Light Bulb