Kenmore 10656714500, Elite, 10656719500 Product Data Sheet, Base Grille Water Filtration System

PRODUCT DATA SHEET

Base Grille Water Filtration System

Model TIKB1/TIRFKB1 Capacity 100 Gallons (379 Liters)

Chlorine

Taste

and

Odor, Particulate

Class

I*; and

against NSF/ANSl

Standard

53

for

the reduction of

(_

I Tested

and certified

by

NSF International

against

NSF/ANSI Standard

42

for

the

reduction of

Lead,

Mercury,

Atrazine,

Benzene,

Toxaphene,

O-Dichlorobenzene,

Cysts,

Turbidity,

Asbestos,

L ndane,

Tetrach oroethy

ene, Endr

n, A ach or,

Ch

orobenzene, Ethy benzene, TTHM and MTBE.

This system has been tested according to NSF/ANSl 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSl 42/53.

Substance		Reduction	NSF Reduction		Average			Influent		Challenge		Maximum				Average			Minimum	%	Average	%
Aesthetic	Effects		Requirements		Influent			Concentration				Effluent				Effluent			Reduction		Reduction
Chlorine Taste/Odor			50%	reduction	2.0	mg/L		2.0 mg/L		_+10%		0.08		mg/L		2.0	mg/L		95.93		97.36
Particulate	Class I*		85%	reduction	3533333#/mL			At east 10,000 part c es/mL				22000			#/mL**	11567		#/mL	99.38		99.67
Contaminant			NSF Reduction		Average			Influent		Challenge		Maximum				Average			Minimum	%	Average	%
Reduction			Requirements		Influent			Concentration				Effluent				Effluent			Reduction		Reduction
Lead: @ pH 6.5			0.010	mg/L	150 ug/L			0.15	mg/L		_+10%	1.0	ug/L			1 ug/L			99.33		99.33
Lead: @ pH		8.5	0.010	mg/L	157 ug/L			0.15	mg/L		_+10%	2.0	ug/L			1.08	ug/L		98.72		99.31
Mercury:	@ pH 6.5		0.002	mg/L	0.0058		mg/L	0.006	mg/L		_+10%	0.0002			mg/L	0.0002		mg/L	96.53		96.53
Mercury:	@ pH 8.5		0.002	mg/L	0.0057		mg/L	0.006	mg/L		_+10%	0.0002			mg/L	0.0002		mg/L	96.5		96.5
Benzene			0.005	mg/L	15 ug/L			0.015	mg/L		_+10%	0.5	ug/L			0.5	ug/L		96.67		96.67
O-Dichlorobenzene			0.6 mg/L		1750 ug/L			1.8 _+10%				1.0	ug/L			1.0	ug/L		99.94		99.94
Toxaphene			0.003	mg/L	15 ug/L			0.015	_+10%			1.0	ug/L			1.0 ug/L			93.33		93.33
Atrazine			0.003	mg/L	10 ug/L			0.009	mg/L		_+10%	2 ug/L				2 ug/L			80.8		80.8
Asbestos			99%		101 MFL			107to	108fibers/L *t			0.17		MFL		0.17	MFL		99.83		99.83
Live Cysts*			>99.95%		120,000/L			50,000/L		min.		8/12				l/L*			99.99		>99.99
Turbidity			0.5 NTU		11.4 NTU			11 _+1 NTU				0.41		NTU		0.24	NTU		96.4		97.89
Alachlor			0.002	mg/L	41.3	ug/L		0.04	_+10%			0.2	ug/L			0.2 ug/L			99.52		99.52
Endrin			0.002	mg/L	5.9	ug/L		0.006	_+10%			0.5	ug/L			0.3	ug/L		91.5		95.47
Ethylbenzene			0.7 mg/L		1867 ug/L			2.1 _+10%				0.70		ug/L		0.0588		ug/L	99.96		100
Lindane			0.002	mg/L	1.9	ug/L		0.002	_+10%			0.02		ug/L		0.02	ug/L		98.93		98.93
Chlorobenzene			0.6 mg/L		2.0	ug/L		2.0 _+10%				0.0005			ug/L	0.0005		ug/L	99.98		99.98
Tetrachloroethylene			0.005	mg/L	14.2 ug/L			0.015	_+10%			0.5	ug/L			0.5	ug/L		96.47		96.47
TTHM			0.080	mg/L	465	ug/L		0.45	_+20%			1.0	ug/L			0.5	ug/L		99.78		99.88
MTBE			0.005	mg/L	14 ug/L			0.015	_+20%			0.70		ug/L		0.52	ug/L		94.94		96.27

Test Parameters: pH = 7.5 + 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F to 71.6°F (20°C to 22°C).

•It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised.

•Model T1KB1 : The filter monitor system measures the amount of

water that passes through the filter and alerts you to replace the filter.

Style 1 - When the filter indicator reads 10%, order a new filter. When the filter indicator reads 0%, it is recommended that you replace the filter.

Style 2 - When the filter indicator light changes from green to yellow, order a new filter. When the filter indicator light changes from yellow to red, it is recommended that you replace the filter.

Use replacement cartridge T1RFKB1, part #9020. In Canada, use replacement cartridge T1RFKB1, part #9020B. 2005 suggested retail price of $39.99 U.S.A./S59.95 Canada. Prices are subject to change without notice.

•These contaminants are not necessarily in your water supply. While testing was performed under standard laboratory conditions, actual performance may vary.

•The product is for cold water use only.

•Refer to the front cover or "Accessories" section for the Manufacturer's name, address and telephone number.

•Refer to the "Warranty" section for the Manufacturer's limited warranty.

	Application	Guidelines/Water	Supply		Parameters
Water	Supply	City	or Well
Water	Pressure	30	- 120	psi	(207 - 827 kPa)
Water	Temperature	33 ° - 100°F			(0.6 ° - 37.8°C)
Service	Flow Rate	0.5	gpm	(1.9	L/min) @ 60 psi

•Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

*Class I particle size: >0.5 to <1 um

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust. tfFibers greater than 10 um in length

*Based on the use of Cryptosporidium parvum oocysts

® NSF is a registered trademark of NSF International.

26